Learn More About Subaru Car Keys While Working From The Comfort Of Your Home > 고객센터

How to Programming a Subaru Key Fob at Home

It is possible that you need the key fob to be programmed by an auto locksmith or subaru Forester replacement Key fob dealer, depending on the age of your Subaru is. This is done by connecting a computer-based programming machine to your vehicle.

To program your Subaru, unlock the driver's door by pressing the door button. Then close it. You will hear a sound on the instrument panel, and the dome lights will flash.

Step 1: Locate the Transmitter Circuit Board

There are many ways to program your key fob. First, you should be aware of the type of key fob you own. This can be accomplished by looking at the design of the key fob, or by listening to the sound in your car.

Once you have the data, you can begin the process of programming your keyfob from home. To do this, you will require a key made of steel and a screwdriver with a flat head. Open the key fob by twisting. Then, push the metal key in and pull the battery from the tiny tabs that hold it in place. Replace the battery with a new one, and then put the key fob case back together.

Step 2: Remove the key fob case

It is a good idea since it could revive key fobs which aren't working for a while. In some cases the buttons on the key fob can be broken. If you notice the buttons' contacts made of metal have come loose then you can try applying solder back to them to get them working again.

Before you start the process, ensure that your vehicle's doors are closed and your ignition is off. You can do this by closing the driver's door, and then pressing the door button ten times in rapid intervals. Then, you'll hear the instrument panel chime, and the dome lights will light up. This means you're ready to move on.

Step 3: Insert the Key Fob in the ignition

There are a lot of articles on the internet that will show you steps on how to program a replacement car keys subaru or new subaru legacy replacement key cost key fob at home, but most of them are not particularly specific. Reprogramming an electronic key is best handled by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver’s seat with the doors shut and the engine turned off. Use the door button to open all doors. Open and close the driver's door three times. Then, remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system will chirp to confirm that the settings have been modified.

Step 4 Step 4: Turn on the ignition

Before you begin this process of programming your key fob, it is important to note that this method works only in the event that you already have a functioning key already. If you don't an auto-locksmith or a dealer will be required to program the key for your subaru spare key cost Fort Bliss.

Once the key has been programmed, it should be capable of starting your vehicle within about five seconds. To begin, ensure that all doors are closed and the engine is turned off. Next, get in the driver's seat and unlock all doors using the door button control. Put the key in the ignition, turn it on to the off position (the electrical systems will turn on but the engine remains off) then turn it back to the off position ten times in rapid succession.

Step 5: Unlock the Door of the Driver's Door

Subaru offers a variety of luxury cars that come with key fobs that lock and unlock doors, start the car, and defrost the windows. These devices are sometimes not working.

Call a locksmith dealer to solve the issue. This will solve the issue and ensure your vehicle is safe.

To accomplish this, you need to open the driver's door, then close it. Then, put the key in the ignition and switch it to the initial position. Then, reverse it to the off position. Do this as quickly as you can for ten times. After the tenth repetition you will hear a sound.

Step 6 Step 6: Press the Lock/Unlock Button on the Driver's Door

The procedure to replace the battery in a Subaru remote key fob is simple. Unlock the exterior fob case. Then make use of an flathead screwdriver, to pry open the inside of the case and remove the old battery.

After taking the battery out and replacing it with the new one. Close the case. Sit in the driver's seat and then unlock all doors by using the door button control. Place the key in ignition and turn the key so that the electrical system is turned on, but the engine remains off. Repeat this 10 times until you hear a chime from the instrument panel. This puts the system in programming mode.

Step 7 Step 7: Press the Lock/Unlock button on the Passenger's Door

The annoying chirp which can be heard when you lock or unlock a subaru spare key Key Fob from outside of the vehicle is distracting for some owners. In certain instances you can deactivate the chirp by opening and closing all doors by double-clicking the lock button on your key fob.

Close all doors, including the fuel-filler lid, and switch off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. After that the instrument panel emits an audible chime. The chime signals that the door and fuel-filler lid are locked. It is possible to change the setting so that doors lock automatically without the need to press a switch.

Step 8: Enter your 8-digit Transmitter Number

Remember the first 8 digits in your mind. Now, get into the driver's chair, close the doors and turn the key into the first position. After ten turns, your instrument panel should chime for a single time.

Next, open the case for the key fob and find the circuit board of the transmitter inside. There should be two or three sets of numbers (8-digits) on the circuit board. Take note of the first number sequence and follow the steps in this guide to register the code on your vehicle's system. For older models, this process might require a visit to the dealer.